Paint Protection Film for RVs, Boats, and Recreational Vehicles

Paint protection film (PPF), also called clear bra paint protection, is a thin, rubber-like film that can be stretched and molded to fit most major impact areas on any recreational vehicle. The military industrialized it, and Used to protect paint and headlight lenses, PPF is a simple way to keep your vehicle looking good for years to come.

RV Paint Protection

One of the largest investments someone can make on wheels, a motorhome is an expensive investment that should be properly cared for. Clear bra paint protection will keep the front of your coach looking as pristine as the interior, no matter what adventures life may bring.

Mainly, paint protection shields your car from road debris, water damage or UV rays. Especially in areas with high traffic, random dust and rocks can end up on your car body, creating tiny nicks and scratches.

In the state of Nevada and other bright areas, many vehicles run the risk of bleaching from excessive sunlight. This affects both the exterior and the interior. Having an extra layer of PFF reduces the potential damage and adds years of life to your vehicle.

Additionally, paint protection can come in a transparent film. This means that you can show off your vehicle’s paint job without worry about it being obscured. Car specialists can apply the film so that it doesn’t hurt the paint finish, and it will contour to any vehicular body shape.

Boat Paint Protection

Boat paint protection is great insurance for your boat. Just think of all the abuse the top edges and the rear deck get from people climbing into the boat. Not to mention all of the toys that get thrown into the water and then drug back into the boat. You can also protect the sides of the boat where the dock might rub.

Almost invisible and easily changed out if damaged, PPF is the most practical decision you can make when it comes to caring for your boat. Gel coat is not something that you can just patch paint back in and a proper repair is a lot of work and money. Just protecting the high traffic and impact areas are sure to keep your investment in shape to keep its value at its peak.

It’s easy to remove water spots from this film, and it can be buffed and waxed if necessary. As a boat owner myself, water spots are my worst enemy and PPF really helps.

Recreational Vehicles

Yes, that’s right! I said recreational vehicles. Southern Nevada has a great off-road community. This includes sand rails, trophy trucks, race buggies, etc. It won’t protect you from the other guys driving, but you won’t get sandblasted either.

You can also install PPF to protect those high traffic areas where people get in and out of the vehicle, often scraping their boots on your nice custom paint. Especially when you have families and large parties in the RV.

Paint Protection Cleaning On RV

Keeping your paint protection means that you can clean your RV without worries about water damage. This can include spotting on your paint job from leaving suds on one side for too long.

This works doubly so for in areas with water restrictions, and you ended to work on smaller kits. Many drivers need to work fast and with different car parts, that are made of fiberglass, aluminum, or glass. PPF helps reduce the need for painstaking effort.

Protect Your Investment With Team Acme Paint Protection

Paint protection film isn’t just for cars. Team Acme has a team of experts that can apply high-quality finishes to any vehicle. We will ensure that you will get extra years of life on your paint job, with the right amount of paint protection.

If you’ve got an RV, boat, or recreational vehicle and want to protect it from the more harsh elements of use, get a quote online, fill out the online form, or bring it down to our shop in Henderson. If you’re unsure that PPF will work for your vehicle, get in touch and we’ll talk to you about your options.

3 Vinyl Boat Wrap Designs

Henderson, Nevada is home to Team Acme, your go-to place for all of your vinyl vehicle wrap design and installation needs. Our professional crew of graphic designers and technicians has created vinyl vehicle wraps for a range of vehicles, including: cars, trucks, vans, RVs, trailers, and boats—yes, boats!

If you own a boat and you are interested in upgrading its appearance, then Team Acme is here to help. We use the highest quality technology and vinyl to design, print, and install vinyl boat wraps. Team Acme’s creative and experienced graphic designers work with customers so ideas can come to life.

Here are a few vinyl wrap ideas for your transportation vehicle on the water:

1. Showcase the Name of Your Boat

If you spend a lot of time around boats—whether they are motorboats, sailboats, or even rowboats—then you probably know boat names are a big deal. If you didn’t know this, then perhaps Titanic, Lusitania, or the Mayflower can clue you in.

Oftentimes, it’s a mystery why people name their boats what they do, but it can’t be denied that boat naming gives boat owners the chance to be clever or just plain showoff-y—but, honestly, why not show it off? You own a boat!

Team Acme can create a unique vinyl wrap design for your boat that incorporates the name of the boat along with whatever else design aspects you might be interested in.

2. Make Your Boat Stand Out on the Water

Some boats are intended for leisure, while others are destined for racing. Did you know there is an entire industry for high power speedboat racing? Similar to other racing sports—horses, racecars, etc.—high speed power boats are typically decked out with graphics and eye-popping colors so they can be easily identifiable on the open water.

If your boat is not a racing boat, however, don’t fret. Team Acme can create eye-popping graphics and lettering for any type of boat.

3. Improve the Appearance of Your Boat with a Vinyl Wrap

There are so many boats in the world to choose from. Just think about the process of buying a boat—it can be a difficult one. First, consumers must decide what kind of boat they want. Then, they have to determine the quality of the boat, along with its size, design, and engine power. There’s also the case of buying used or new.

Whatever kind of boat you have—large, small, used, or new—vinyl wraps are a great way to mix up the appearance of boats. Upgrade the appearance of your boat by adding vinyl details, graphics, or lettering. Improve the appearance of an older or faded boat by changing the color or design of the boat with a vinyl vehicle wrap.

Wrap Your Boat with Team Acme 

Learn more about Team Acme’s vinyl wrap design and installation processes by visiting our website. Contact Team Acme by phone at 702-566-8326 or fill out our online contact form and we’ll be in touch.

Boat Wrapping Services in Las Vegas

Who said vehicle wraps only work on cars? Boat wrapping serves a range of benefits, too, that can almost instantly be noticed. The key is to have your wrap installed by professionals with experience wrapping boats and other types of vehicles.

If your boat wrap is poorly installed, your boat’s visual appearance will be tarnished and you’ll most likely have to get the wrap reinstalled. Get it right the first time with an expert job done by the skilled professionals at Team Acme. We’ve had over ten years of experience wrapping everything from trucks to luxury vehicles and speedboats.

Advantages of Getting a Boat Wrap

Boat wraps are among the most effective means of mobile advertising. What better way to promote your business and enhance your brand loyalty than with a luxurious looking wrap that can be spotted while your boat is docked or as you’re driving around the waters.

Wraps make for excellent forms of moving billboards since they can capture the attention of more than just your target audience, ultimately translating into a more efficient way to passively generate leads. In addition, a uniquely designed wrap will enrich your boat’s overall appeal and it’s easy to clean and maintain.

Boat wraps serve as a protective layer for a boat’s factory body paint, too, especially when they cover the vehicle in its entirety. Since our quality wraps last for three to four years (depending on factors like sun exposure), you’ll be able to save money as you promote your brand.

If you’d like to make any adjustments and feature a new special promotion or service on your boat wrap, it can easily be removed and reapplied without altering the boat’s exterior. Boats wraps are also highly affordable forms of advertisement that will save you from having to endure costs such as subscription fees.

The Cleanest Boat Wrap Installation in Las Vegas

At Team Acme, you can choose whether you’d like to go for a full body graphic or die cut partials. We start off with taking pictures of your boat and take its exact measurements to create a custom template especially for your boat. We’ll advise you on which options can best suit your budget.

Our expert designers will then sit down with you to brainstorm different design ideas and create several styles that best portray the image of your business for you to choose from.  You can get one round of changes with no extra charge.

• Your boat will have to be pre-cleaned a few days before the installation day.
• We’ll be sure to remove or adjust anything to assure an efficient installation.
• Before placing the wrap, Team Acme will give your boat a final thorough clean, removing anything from wax to tar.
• We then use a squeegee to lay the wrap sticker panels along the boat.
• Next, we trim the edges of the sticker panels to fit the design.
• Heat is used to set and secure the stickers on the boat’s edges.
• Optically clear anchor tape is placed on really curvy sections to avoid failure.
• Once installation is done, we clean everything up and return any removed parts back in place.

Finally, the boat is left to dry in the sun for an effective finish. Team Acme then checks for any loose areas, and if any are found, we touch them up before deeming it ready to go back on the water.

Contact Team Acme for Your Premium Boat Wrap

Team Acme uses the highest quality printers and materials in the market to assure a durable installation and one that meets the high standards demanded by the industry to stand tall among the competition. If you’d like to learn more about our boat wrap service, give us a call today.

Boat Wraps: What It Takes to Make a Splash

The weather is warm and it’s a great time of year to get the boat out to enjoy this weather.  Why not make a statement with your boat this year and consider a custom boat wrap?  You can add color or a cool design to promote your business and/or just add a little bit of your own personality to your boat, thanks to Team Acme. You will certainly stand out in the crowd with this unique yet affordable addition to your boat.

The Many Benefits of Vehicle Wraps

There are many benefits to wrapping your boat.  Since boat wraps are not permanent, they can be changed anytime you want to alter the look of your boat.  Wraps can be removed quickly and easily if needed — or if you decide to sell your boat.  Plus, they are an extremely affordable option that gives you the flexibility to change the look of your boat whenever you like.  (Yes, they are much less expensive than a paint job).

Boat wraps can even help advertise your business, giving your name and logo a wide audience on the water every time you take it out.

And don’t fear: boat wraps do not impact the value of your boat.  They can actually extend the life of your paint job, and are very easy to clean, allowing you to maintain your current paint job, while changing the look of the boat.

Team Acme’s Local Design Team

No matter how big or small your budget is or the level of detail you decide on, Team Acme will partner with you to give you the best possible product while staying within your budget.  In addition, our team is efficient and can turn your job around and have your boat back on the water in just a matter of days.

Our design team is located on-site, giving our customers an unusually high level of access to them.  We encourage our customers to provide feedback throughout the process.  We find that this is extremely helpful for customers looking for a unique look, design, or color that may never have been attempted before.

Trust Team Acme With Your Boat or Vehicle

Team Acme is committed to providing the best customer service in the business, the highest quality products, all at competitive and affordable prices.  As a local company, we handle all of our jobs in-house and strive to give each of our customers personal service that they will remember.  We stand behind our products and our work.

We are very fortunate to have developed a strong customer base that comes back for repeat service and that frequently sends us additional business by way of customer referrals.  So, if you are looking for a creative way to make your boat (or your vehicle) look unique or you want to market your business, consider a boat or vehicle wrap.  Contact us today and speak with one of our experienced customer service specialists to get more information and request a quote.

Vinyl Lettering for Boats

So you’ve just bought a boat and are absolutely dying to get it out on the water. However, there are a few important things you need to get out of the way first – the title, your registration, and the boat’s name!

Requirements for Boat Registration Numbers in Nevada

Once you receive your registration number from the Nevada Department of Wildlife, you’re going to have to decide how you’re going to put it on your boat. Nevada law requires you to display registration number (a Nevada Certificate of Number) and validation decals on your boat in order to legally operate the vessel on public waters.

However, there are some pretty strict guidelines you’ll need to follow when applying these decals. Your registration letters and numbers must:

• Be permanently affixed to the forward half of each side of the vessel
• Be placed so that they are clearly visible and legible
• Read from left to right on both sides of the vessel
• Be in block letters at least 3 inches high
• Must contrast with the background
• Be separated by a space or hyphen (for example LS  0229  VW or LS-0229-VW)

Validation decals must be placed on each side of the vessel toward the stern of the registration number and within 6 inches of and in line with the number.

Now you can order individual lettering from some online shop or paint them on yourself, but what guarantee do you have that they’re going to contrast the way you need them to or that the paint won’t wear away in the water?

Vinyl graphics can make it easy to follow all these regulations and professional installation will make sure their application does not mar the beauty of your boat.

Naming Your Boat

This is maybe one of the most exciting things for new boat owners. Whether you’ve known what you wanted since you were a kid or have talked it over with the family, you’re going to want to display it proudly on your transom, stern or somewhere above deck.

Now you can paint it on, too, but maybe you’re not such an artist. Vinyl graphics can rescue here, too. If you use a professional shop, you can get a design professional to help you achieve the look you want and the install team can make sure everything is straight and precisely placed.

Stripes, Decals and Other Graphics

If you’re feeling really adventurous, you can add other kinds of graphics to your boat. Whether you want include your home port, highlight a real sleek line, add fancy decals, or create a unique graphic that gives your boat personality, vinyl graphics are the perfect solution. They won’t ruin the finish and can really give your boat a unique look.

As a boat owner myself, I know how important it is for everything to look just right. If you’re a new boat owner in the Vegas area and are interested in a custom look and professionally installed lettering, decals, and graphics, contact Team Acme today! We can give you a quote, get you in the shop and out on the water fast!

The Best Boat Names We’ve Ever Seen

Because you can’t appreciate a good boat name without a good sailing song.

1.    Who Cares

2.    Sails Call

     “Honey, I can’t talk now. I’m on a Sails Call!”

3.    Pier Pressure

     You want me to what?!

4.    ‘Ohana Time

     It’s a good thing that no one gets left behind!

5.    Piece of Ship


6.    Sex Sea


7.    Wasted Seamen

8.    Ship for Brains

9.    Scaramouche

     Will you do the fandango?

10. Aquaholic

11. Playbuoy

12. Deep Ship

     We’re in it now, boys!

13. Pugboat

     Aww!

14. Fish and Chicks

15. My Big Wet Deck

     Don’t slip!

16. Dijabringabeeralong

17. The Codfather

     You come to me on this day of rest and relaxation…

18. Cirrhosis of the River

     We’re starting to notice a theme, here.

19. Campbell’s Sloop

20. Unsinkable II

     RIP Unsinkable I

21. 36 Seas

22. Arrr Boat

23. The Kerry Bridget…?

24. Bullship

     We called it!

25. Passing Wind

     Excuse you!

26. Seas the Day

     Carpe diem, boys!
27. Hakuna Matata

     It means no worries!

Team Acme for Boat Graphics

One of the great thing about our job is the fun we get to have doing it. If you’ve seen any fun or clever boat names, share them in the comments! And if you’re looking to christen your boat, give us a shout at (702) 566-8326. We’ll answer any questions you may have about the process and give you a quote.

How to Prevent Water Spots Ruining Your Boat’s Paint Job

If you are a boat owner, there’s no question that you love the water, love the outdoors, and love your boat!  There is nothing better than spending your free time afloat.  In addition to all of that great leisure time for you and your family, you also probably want to keep your boat looking its best.  It can take some time and effort to properly take care of your boat.  If you have owned a boat for a significant period of time, you are already aware of how difficult upkeep can be.  Water stains are one issue that can drive you absolutely nuts!

Paint Protective Film for your Boat

The challenge of managing water stains on your boat is complicated in part because of all of the different materials on your boat that you need to protect.  Some of the most vulnerable areas of your boat are the areas that you and your guests touch on their way in and out of the boat.  Water stains can be prevented on the top rails, where people climb into or out of the boat, or walk on the bow, or where the trailer might touch the gel coat and rub.  Paint protection film (PPF) is a thin, rubber-like film that can be stretched and molded to protect these high impact areas of your boat.Using PPF is one of the most practical decisions you can make for the life of your boat.  While it is not perfect for your entire boat (this would simply cost too much), it is invisible and water spots can very easily be removed from it with simple buffing and waxing.  As the season changes and you get ready to use your boat on a more regular basis, consider PPF installation as a way to protect and preserve your boat from the harsher elements of life on the water.

Team Acme is ready to install PPF on your boat, vehicle or other recreational vehicle

Team Acme has been installing paint protection film on cars, trucks, boats and recreational vehicles for more than a decade.  We can take the necessary measurements, provide you with a quote and an estimate of how long this particular job will take.  We can also help you determine the best parts of your boat, vehicle or RV to cover, so that you get the most out of your investment.  We understand this kind of job can add up quickly, so we are mindful of using PPF in the most strategic ways so that you get the benefit that you are looking for.Team Acme stands behind the products we use and our installation process.  You will find that our crew is dependable and customer focused, and ready and willing to brainstorm with you about the best way to complete your job.

Make a plan to protect your boat this year! Get a free quote or give us a call at (702) 566-8326.

Automotive Paint Protection Film

Paint protection film (PPF) is a clear, rubber-like film that is applied to the exterior of your vehicle to prevent road debris from damaging your paint and headlight lenses.

With over 10 years of experience using all kinds of paint protection film, we have settled on SunTek PPF for its performance qualities, visual appearance, and longevity. For us, it was a really clear choice. It’s crystal clear with no visible orange peel – it’s the most invisible film we’ve encountered yet. With widths up to 60”, almost any car hood can be wrapped in one huge piece.

Besides the best auto paint protection film on the market, we also have the largest, most up to date computer cut templates available, which means we can pre-cut all of the films and not go near your vehicle with a single blade, unlike competing shops that cut the film directly on the vehicle. Ultimately, it allows us to reduce the risk of installation damage.

Benefits of Paint Protection Film

When a vehicle is brand new, paint protection film provides the perfect opportunity to keep it looking new forever. It prevents damage from rock chips, scratches, sandblasting, hazing, air pollution, oxidation, and acid rain. If you plan on keeping the vehicle looking new and protecting one of your most important investments, a PPF installation should be your vehicle’s first modification.

Nobody wants to buy a vehicle that has been repainted and with PPF you’ll never have to touch up your paint job because of damage from road debris and exposure. Almost invisible, SunTek PPF is completely safe for OEM paint and is easily removed if you ever choose to do so. It works on all painted surfaces, including boats, RVs, recreational vehicles, and a whole lot more!

See SunTek Paint Protection Film in action!
 

Our Process of Paint Protection Installation

• The vehicle must be delivered for installation as clean as possible.
• We will inspect the vehicle for defects in paint and damage that might cause visual imperfections, film, or paint failure.
• Estimate time and cost of PPF installation. Usually, a full day for installation and manicuring the film will be required.
• Computer cut the required patterns to be installed.
• Final clean of the vehicle.
• Install PPF using required soap and water mixture. Tack accelerator used is water and alcohol based.
• After installation, we manicure all edges of the film. Park vehicle in sun to speed cure times while rechecking PPF and manicuring where needed.
• Final inspection upon delivery to the customer.
• For the next few days pay attention to the PPF, as any failure that happens will happen in the first few days of the curing process. If any problems arise bring back to our shop directly to get it fixed.

Paint Protection Film Warranty

Our one-year warranty covers edge or film failure due to defects or installation error. It does not include scratches from daily use or damage inflicted directly to the surface of the film. Once our one year expires, the manufacturer’s warrant comes into effect. See the SunTek Manufacturer’s warranty for details. Warranties are non-transferrable if the vehicle is sold.

Keep Your Car Mint – Contact Us Today

If you’re looking to keep that new car in mint condition, get a quote for a PFF installation online or call Team Acme at (702) 566-8326.

Camo Vinyl Wrap : Expert Installation

Looking for a unique way to make your vehicle stand out but also blend in at the same time? Have you ever considered installing a camo vinyl vehicle wrap to your automobile?

If you live in or near Henderson, Nevada, or you’re just in the area, then Team Acme is your go-to spot for vinyl vehicle wrap design and installation. Team Acme’s professional and experienced crew of graphic designers and technicians make the task of installing vinyl vehicle wraps look easy, but trust us, it isn’t.

Team Acme’s crew has over a decade of experience designing, printing, and installing high-quality vinyl vehicle wraps to a broad range of vehicle types. We cover cars, SUVs, trucks, vans, boats, trailers and more.

The thing is that so many of the people who make this look easy have been doing it for a long time. You might watch one doing their thing and get the idea that the vehicle wrap process is simple. Whenever someone does the same task a number of times over a period of time, they start to get good at it. That’s in fact why you’ll want to work with experts who are skilled at doing this kind of installation.

Customer Satisfaction With Camo Vinyl Car Wraps

When it comes to vinyl vehicle wraps, Team Acme’s top goal is to make all of our customers happy. This means that every day our specialists strive to produce high-quality vinyl wraps that meet the expectations of our customers. It also means that Team Acme’s vinyl wraps must be high quality and our installation processes pristine, bubble-free with camouflaged patterns.

Within the first few days of working with Team Acme, customers quickly become aware of how much we care about them and their satisfaction. To make things even better, you’ll end up with a vehicle that looks very different than nearly anything else out there. A camo vinyl wrap is something that’s going to really stick out even if it’s ostensibly designed to blend into the background. Expert installers follow a few simple steps to give it the most realistic appearance possible.

Step One Of Team Acme’s Vinyl Vehicle Wrap Design Process

The first step in Team Acme’s design process for vinyl vehicle wraps is to determine what type of wrap is going to be installed on the vehicle. We want to know what our customers are expecting when receiving their vehicle wraps.

Not everyone is on the lookout for the same thing. Some people end up considering one design before eventually settling on something else. If you’re just getting into the whole vehicle wrap scene, then you might want to come into things with a completely open mind.

Step Two: Is This Partial Or Full Vehicle Wrap What You’re Looking For?

Once our crew understands what a customer expects in a design, then our crew acquires measurements of the vehicle and creates a template so we can move forward with the design process. We come up with a few sample designs and then present them to the customer so he or she can approve or tweak the design.

Naturally, you always have the final say at this point or anywhere else in the design process. If you don’t feel that something looks exactly like the design you wanted, then you simply have to let us know so we can put together the coolest camo wrap on the road today. As soon as you’ve finalized the design, we can start printing.

Step Three: Printing And Applying The Vinyl

With the measurements of the customer’s card on file and an idea of what the final product will look like in the end, it’s time to print the vinyl. Before applying any vinyl, Team Acme gives the car one last cleaning. Then we apply the vinyl panels along with the dry vehicle with a squeegee.

Once all of the panels are installed, it’s time to trim the edges, clean up the look of the vinyl, and heat set the material. After these steps are completed, we leave the car out in the sun for a few hours so it can bake. This ensures that the wrap is set properly in a way that even the best mechanical systems would never be able to replicate.

Make Your Car Blend In With Team Acme

If you’re ready to add a cool camouflage look to your vehicle, then you can’t go wrong with Team Acme. Our expert designers and technicians will do such a wonderful job installing your new vinyl vehicle wrap that even the wrap will blend in with your vehicle! Even as it’s blending into the background, though, your vehicle is sure to stand out from the rest of the crowd with a look that everyone else is going to envy.

Visit Team Acme’s website today to learn more about Team Acme’s design and installation processes for vinyl vehicle wraps. To see other vinyl wraps Team Acme has created in the past, view our vehicle design and print gallery. As soon as you’ve found a design that you really like, let our crew know about it. Visit the contact form on our site so we can dress your car or truck up like never before.

How Much Money Should You Be Spending on Vinyl Vehicle Wraps in Nevada?

When it comes to calculating the cost of a vehicle wrap, you may be tempted to only look at the cost of the wrap and the installation fee. That is a short-sighted decision. These factors are only part of the equation. 

You also need to calculate in the value of the wrap in terms of marketing exposure for the long term, and of course, the value of the protection that the wrap provides to your vehicle. You should also note that this is not one of the times when you should trust the project to the lowest bidder. 

Getting a vehicle wrap on your fleet vehicles should always be done with a mind for quality. After all, not only does this wrap represent you in the form of the main image many will see of your company day in and day out, but the cost of a shoddy wrap, in terms of repair, replacement, and/or removal can significantly impact your marketing budget. 

With that in mind, here at Team Acme, we strive to provide the highest quality of service and to provide our customers with superior vinyl vehicle wraps for all of their vehicles. We have worked with customers to do wraps for luxury cars, buses, trucks, SUVs, boats, motorcycles, ATVs, RVs, and even big rigs. 

Of course, we want you to also bring us your business, but more so, we want you to be educated as to what a good and bad wraps are and how much wraps should really cost. This way you can get the best quality job done at the best price possible, even if you ultimately decide to not let us do the project for you. 

To that end, we would like to provide you with a vehicle wrap guide which will cover factors such as price ranges for good wraps, what to expect from substandard wrap jobs and therefore why they should be avoided, and how you might spend a little more now, but will ultimately save more in the long run by insisting on quality. 

How Much Should You Spend on a Vinyl Vehicle Wrap

When it comes to calculating the cost of a vehicle wrap a number of elements come into play. Among these factors are whether the wrap job is a full or partial wrapping, the size, and style of the vehicle, and of course the design elements of the wrap itself. Of course, a rush job will always be more expensive than one that is planned out and has lots of lead time. 

Another factor is if there are complicated elements to the install such as trailers, windows, and compound curves to the vehicle as these may add additional costs as well. Here at Team Acme, we have a very straightforward quoting process to help get you started. Just fill out our online form, and then schedule a visit to the shop when it is most convenient for you. 

Our friendly, knowledgeable, and professional team members are eagerly awaiting the chance to meet you and help you get started with the design process. They will evaluate your needs and provide you with a base quote that we can then work up in greater detail as we flesh out exactly what you want to do with your vehicle wrapping. 

The Price of Bad Vinyl Vehicle Wraps

When you go for a lower priced vehicle wrap job, you are setting yourself up for disappointment to be sure. It won’t be long before these wraps start to peel, fade, crack, flake, and shred. To be honest, we have seen some bad wraps that don’t survive more than three car washes before they start to fall apart. 

When you go for a cheap wrap job you are not saving money. In fact, it’s just the opposite. Not only will you have to spend even more to get the old cheap wrap removed, but you will need to replace it. 

Don’t forget as well that the bad wrap has been all over town. Your potential customers will see the poor quality, Then they start calling your competitor. After all, image is everything these days. 

Then there is the potential damage that a bad wrap can do to the exterior of your vehicle. When you go to a lower end shop you are likely to see yourself saving money because they have unskilled and badly trained staff who will cut corners. They may also use adhesive and equipment that is substandard, and which may damage the paint and other surfaces of your vehicle. 

You should also be prepared that if something does go wrong with your wrap job, they will more than likely not stand behind their work to make it right. It’s just not worth it to take the chance, instead choose a reputable shop that has highly trained staff, the best equipment and materials, and a passion for excellence. Choose Team Acme. 

Contact Team Acme to Learn More About Prices

We are so excited to have the chance to serve you for your vehicle wrap needs, as well as to be your go-to shop for window tinting, large format vinyl printing projects such as banners and signs, and other promotional jobs such as wall wraps, murals, and barrier wraps. We invite you to scroll through our gallery to see many of the projects we have completed for satisfied customers.

When you are ready to get started, you can use our online contact form. Come let us show you what quality looks like, what great customer care looks like, and most of all what your vehicle can look like when you choose to wrap it with Team Acme.

Get a Quote Online >>>